Bird & Flower Whirligigs Wood Pattern

The inside of these colorful, fun whirligigs turn and spin wildly in the wind! Sure to delight your guests. Full-size pattern for both designs (Up to 13″ tall).

More Info

Description: Bird and Flower Whirligigs

Dimensions:

Wood:
one 1X2 x 24″ long pine board
one 12″ x 24″ x 1/2″ thick piece of plywood
one 6″ x 12″ x 5/32″ thick piece of plywood
one 1/4″ dia. x 24″ long dowell
one 3/8″ dia. x 48″ long dowell
two 3/8″ dia. wooden buttons (#BTN375)

Hardware:
two 7/32″ dia. x 9/16″ long brass tubes
two #6 x 1 1/2″ long brass screws
two 3/16″ dia. brass washers

Tools:
band saw or scroll saw with a smooth cutting, non-chipping, scrolling blade, screwdriver drill and 1/8″, 7/32″, 1/4″, 3/16″ and 3/8″ dia. drill bits

Supplies:
transfer paper, pencil & clear tape (#CARB) sand paper-medium & fine grits wood filler-non shrinking, fast drying for wood flaws, paint brushes-2″, 3/4″ & 1/4″ wide brushes and a fine tipped detail brush wood glue-exterior

Paint:
white water base primer for base coat (#PRIMQT) P2015-purple
P2023-brown iron
P2027-bright yellow
P2041-bittersweet
P2046-adobe
P2047-lavender
P2057-quaker grey
P2068-Christmas green
P2084-lisa pink
P2089-navy blue
P2090-hippo grey
P2436-charcoal
P2449-hydrangea pink
P2459-crocus yellow
P2477-denim
P2478-periwinkle
P2485-wild rose
P2505-white
P2506-black

Sealer:
high-grade, non-yellowing, semi-gloss UV protected project sealer for outdoor protection